Author Topic: 750 SIDE PANEL SCREWS  (Read 552 times)

Offline phil37

  • Hero Member
  • *****
  • Posts: 3493
  • Lincolnshire
750 SIDE PANEL SCREWS
« on: November 29, 2017, 10:56 »
Just had another batch of the 750 side panel screws arrive – original Laverda Part No – 30 490 306 – made in Stainless steel – these have the 7mm thread and will fit all Breganze 750’s except for a very few early Gt’s – which had 6mm – ideal to tap to 7mm if yours are missing/ rusted etc. The close up shot shows some of the very fine machining marks – but screw looks like chrome original when fitted to panel. Cost is £12.50p a pair or £7.00p for one. Unfortunately they are just oversize for the cheaper rate of UK post so post is an extra £3 for any amount up to about a dozen!. EU postage is £4 extra and  R.O.W. is £5extra.

Forgot to say:- My paypal address is the same as my e-mail address on my profile on this forum.
If paying by this method - please inform me immediately you've made the payment
 as P/pal don't always let me know. Don't forget to include your address.
 Payment can also be made by cash, postal order or bank transfer - Pm me if details needed


Offline Paul Marx

  • Hero Member
  • *****
  • Posts: 3327
    • Les motos de Paul
Re: 750 SIDE PANEL SCREWS
« Reply #1 on: November 29, 2017, 12:20 »
Hi Phil,

Payment sent for 1 set.

Best regards
Paul

Offline phil37

  • Hero Member
  • *****
  • Posts: 3493
  • Lincolnshire
Re: 750 SIDE PANEL SCREWS
« Reply #2 on: November 29, 2017, 13:11 »
Gottit - thanks Paul - regards -Phil

Offline helicopterjim

  • Hero Member
  • *****
  • Posts: 861
Re: 750 SIDE PANEL SCREWS
« Reply #3 on: November 29, 2017, 17:00 »
Will they fit a 74 SFC side panel?
74 SFC
72 SF
75 3C
79 (81) Formula Mirage 1200
Various Ducati's, Guzzi's, Puch's ... a BSA Sloper and maybe even an R90
I don't have a 1977 Honda XL 175

Chilliwack, British Columbia

Offline Paul Marx

  • Hero Member
  • *****
  • Posts: 3327
    • Les motos de Paul
Re: 750 SIDE PANEL SCREWS
« Reply #4 on: November 29, 2017, 19:35 »
Yes, you'll need 4.

Paul

Offline helicopterjim

  • Hero Member
  • *****
  • Posts: 861
Re: 750 SIDE PANEL SCREWS
« Reply #5 on: November 29, 2017, 19:39 »
74 SFC
72 SF
75 3C
79 (81) Formula Mirage 1200
Various Ducati's, Guzzi's, Puch's ... a BSA Sloper and maybe even an R90
I don't have a 1977 Honda XL 175

Chilliwack, British Columbia

Offline pjv

  • Newbie
  • *
  • Posts: 3
Re: 750 SIDE PANEL SCREWS
« Reply #6 on: November 30, 2017, 21:05 »
Phil
PayPal for 1 set sent

Thanks

Phil

Offline phil37

  • Hero Member
  • *****
  • Posts: 3493
  • Lincolnshire
Re: 750 SIDE PANEL SCREWS
« Reply #7 on: December 01, 2017, 09:01 »
Phil
PayPal for 1 set sent

Thanks

Phil

Gottit  thanks- will send today - Regards - Phil

Offline Gerald

  • Hero Member
  • *****
  • Posts: 3016
Re: 750 SIDE PANEL SCREWS
« Reply #8 on: December 06, 2017, 17:28 »
Received a set today from Phil. Excellent finish and finally a set with the right length.
Mille Grazie  ;D

Regards, Gerald
« Last Edit: December 06, 2017, 20:19 by Gerald »
__o
_- \_<,
(*) /' (*)

Offline Paul Marx

  • Hero Member
  • *****
  • Posts: 3327
    • Les motos de Paul
Re: 750 SIDE PANEL SCREWS
« Reply #9 on: December 06, 2017, 20:11 »
Received mine as well.

Paul

Offline phil37

  • Hero Member
  • *****
  • Posts: 3493
  • Lincolnshire
Re: 750 SIDE PANEL SCREWS
« Reply #10 on: December 07, 2017, 09:05 »
Received a set today from Phil. Excellent finish and finally a set with the right length.
Mille Grazie  ;D

Regards, Gerald

Hi Gerald - Glad you like them - I just give them about 30 seconds of polishing with a bit of Green compound on a sisal wheel - seems enough to get them gleaming. - All the best - Phil

Offline Gerald

  • Hero Member
  • *****
  • Posts: 3016
Re: 750 SIDE PANEL SCREWS
« Reply #11 on: December 07, 2017, 09:45 »
Phil,

If you ever decide to do a batch of throttle cables for the triples in a short length for clip-ons,
I'm your first customer ;)

Regards,
Gerald
__o
_- \_<,
(*) /' (*)