Author Topic: Witt DMC 32 wiring  (Read 361 times)

Offline woodlawn

  • Newbie
  • *
  • Posts: 26
Witt DMC 32 wiring
« on: May 19, 2017, 22:58 »
Hey all, I'm installing my new DMC 32 on my RGS. The new wiring loom from the optical pickup only has 3 wires a black,brown, and yellow. My old DMC blue box  had a ground in the pickup wiring.  Do I need to add that in as an additional ground or do I just use the one ground that's on the main wiring harness?
Thanks again for all your help.
Charlie
1983 RGS 1000

Offline jotacorsa

  • Hero Member
  • *****
  • Posts: 1559
Re: Witt DMC 32 wiring
« Reply #1 on: May 20, 2017, 01:07 »
i believe it is black to DMC pin 15, brown to pin 4 and yellow to pin 3 like the DMC 2 120
Not putting miles on your Laverda is like not having sex with your girl friend so she'll be more desirable to her next boy friend.

https://picasaweb.google.com/116081803601732579643/CustomerMachines

Offline woodlawn

  • Newbie
  • *
  • Posts: 26
Re: Witt DMC 32 wiring
« Reply #2 on: May 20, 2017, 01:31 »
Thanks for your reply.  I should have stated the box is already wired with a 3 pin connector so no concern there. I guess my question is does the optical pickup require it's own ground as it does on a DMC1
1983 RGS 1000

Offline jotacorsa

  • Hero Member
  • *****
  • Posts: 1559
Re: Witt DMC 32 wiring
« Reply #3 on: May 20, 2017, 15:11 »
I don't think so the earlier optical did not need the ground. I believe the only changes with the 3.2 are internal
Not putting miles on your Laverda is like not having sex with your girl friend so she'll be more desirable to her next boy friend.

https://picasaweb.google.com/116081803601732579643/CustomerMachines

Offline woodlawn

  • Newbie
  • *
  • Posts: 26
Re: Witt DMC 32 wiring
« Reply #4 on: May 20, 2017, 20:06 »
OK great. Thanks for your help. Now I can keep moving. I enjoyed your gallery of bikes.
1983 RGS 1000