Author Topic: Gasket Maker - UK  (Read 1115 times)

Offline Paul H

  • Hero Member
  • *****
  • Posts: 842
Re: Gasket Maker - UK
« Reply #15 on: February 16, 2017, 15:28 »
testing.....

Offline a14rgs

  • Hero Member
  • *****
  • Posts: 1394
  • Wiltshire, U.K.
Re: Gasket Maker - UK
« Reply #16 on: February 16, 2017, 20:11 »
Still no worky....... :(
1983 RGS1000, 148000km, owned and loved since 1989 :-)
1977 Jota - rebuild complete Jan.2015 after 20 years off the road - another one bought back to life and grins :-)

"Grammar : the difference between knowing your shit and knowing you're shit".

Offline Reggie3cl

  • Hero Member
  • *****
  • Posts: 5697
  • RGS1200: style and substance.
Re: Gasket Maker - UK
« Reply #17 on: February 16, 2017, 20:17 »
Nope.

1985 Laverda RGS1200, 1997 BMW R1100GS

"One of the gladdest moments of human life, methinks, is the departure upon a distant journey." Sir Richard Burton

Offline cbertozz

  • Hero Member
  • *****
  • Posts: 908
Re: Gasket Maker - UK
« Reply #18 on: February 19, 2017, 21:46 »
When you share a Google image, get the share link (use the share icon in the top left on desktop or photo menu on app), copy and past it into your browser, then right click on image and 'copy image address', paste that into the forum between the [img] brackets.
1978 Laverda Jota #6041
First owned in 1991, reacquired 2016.
2015 Aprilia RSV4 racebike

Offline Sir Sidney Ruffdiamond

  • Hero Member
  • *****
  • Posts: 936
  • i question my sanity sometimes
Re: Gasket Maker - UK
« Reply #19 on: March 03, 2017, 14:54 »
Got my gassies from Alan Bell of the ILOC parish

Offline Dennis

  • Sr. Member
  • ****
  • Posts: 318
Re: Gasket Maker - UK
« Reply #20 on: March 04, 2017, 13:27 »
I sometimes make my own gaskets. If the mating surface is flat I scan and print it. you can use the printout out as a template over gasket paper or you can run the gasket paper through your printer if it is not too thick.
Dennis

Offline CLEMTOG

  • Hero Member
  • *****
  • Posts: 3432
Re: Gasket Maker - UK
« Reply #21 on: March 14, 2017, 16:48 »
dear Paul my old jock strapped Hag.
would you please go down to Asda or Tesco and print this photograph using their machine, it will cost about 10p, and then I will get to see it!
CLEM

Offline John lord

  • Newbie
  • *
  • Posts: 16
Re: Gasket Maker - UK
« Reply #22 on: March 19, 2017, 17:40 »
That's very interesting , just looking for a supplier for my 750 sump plates , will give him a ring

Offline phil37

  • Hero Member
  • *****
  • Posts: 3281
  • Lincolnshire
Re: Gasket Maker - UK
« Reply #23 on: March 20, 2017, 09:18 »
That's very interesting , just looking for a supplier for my 750 sump plates , will give him a ring

Can do them at a good price in small quantities - regards - Phil

Offline John lord

  • Newbie
  • *
  • Posts: 16
Re: Gasket Maker - UK
« Reply #24 on: March 20, 2017, 17:26 »
 The quantities I need is 10 at a time , for the time being Phil ,as I've had more interest than I thought ,
I only was going to make my own but , quite a few folk said they would want one , so I've made a batch ,
You can Quote me on a price for ten at a time if you like by all means ,
                                 Cheers John. 🏍🇮🇹🏍

Offline phil37

  • Hero Member
  • *****
  • Posts: 3281
  • Lincolnshire
Re: Gasket Maker - UK
« Reply #25 on: March 21, 2017, 08:31 »
PM sent

Offline John lord

  • Newbie
  • *
  • Posts: 16
Re: Gasket Maker - UK
« Reply #26 on: March 22, 2017, 08:48 »
Thanks Phil ,very keen price, will be in touch , thanks again , john